BX1020-G

Front Load / Dual-Note Glory Bill Dispenser

Standard’s BX – Bill Exchanger Series machines are designed to be an “Automated Attendant”, providing bill change for higher denominations. Excellent locations for Bill Exchanger machines are attended or unattended coin laundries, card laundries, car washes, museums, zoos and aquariums, paid parking lots; anywhere that would allow more customer convenience by breaking higher denomination bills into smaller denomination bills used for your daily transactions. Why make your employees break $20 bills, when using the BX1020-G would be easier?

The BX1020-G features the Glory MultiMech – Dual-Note Bill Dispenser. This dispenser allows the owner to load the bills into two bill drawers, and slide them into the dispenser. The top drawer holds up to 1,300 bills, and the bottom drawer will hold up to 1,700 bills. That’s 3,000 bills total capacity! The Glory MultiMech is a low maintenance bill dispenser with their patented “Intelligent Double Detection” technology and self-adjusting dispense features.

Contact your local Standard Change-Makers Distributor for more information on these machines.

BX1020-G Bill-to-Bill Exchanger Features:

  • Front Load configuration for Bill Exchange
  • (1) CPi  (Mars) Bill Acceptor – accepts $1 – $20 Bills – with 500 Bills Stacker
  • (1) Dual-Note Glory MultiMech Bill Dispenser – holds from up to 3,000 (new) Bills
  • Includes EF+ Module – with Remote Notification Feature
  • Heavy gauge steel cabinets with solid-welded seams (no rivets or spot welds)
  • High gloss, powder-coat enamel paint finish with applied Lexan graphics decal
  • (2) T-handle Locks with Ace Lock Plugs
  • One Year Warranty on Glory Bill Dispenser unit
  • Two Year Limited Warranty
SPECIFICATIONS
Accepts
$1 | $5 | $10 | $20
SPECIFICATIONS
Dispenses
One or Two Denomination of Bills
SPECIFICATIONS
Capacity
Up to 3,000 (New) Bills
SPECIFICATIONS
Dimensions
32"H x 14.75"W x 21.50"D
SPECIFICATIONS
Ship Weight
200 lbs.
MC100

BX1020-G

The Bill Exchanger Series machines act as an “automated attendant” by breaking $20 bills into a smaller denominations, such as $5 bills and $1 bills

MC200

BX1020-G

The BX1020-G accepts bills and dispenses lower denomination bills

MC100

BX1020-G

The BX1020-G uses the Glory MultiMech Single Note Bill Dispenser

MC100

BX1020-G

The BX1020-G has an optional Patron Display that shows bill accepted and dispensed. With the Attendant Keyswitch, attendants can see the last 10 bills accepted with time and date stamp

Optional Features for BX1020-G

DESCRIPTION
CPi (Mars) Bill Acceptor for $1 - $100 (US)
Vending Base (29"H x 14.75"W x 21.50"D)
(1) Non-Resettable Bills In / Bills Out Counter Kit
(1) Resettable Bills In / Bills Out Counter Kit
Crank Locks with Medeco Lock Plugs Upgrade
Transcient Surge Suppressor
LCD Patron Display and Attendant Keyswitch
DESCRIPTION
Cashcode Bill Acceptor for $5 -$100 (CAN)
Medeco Lock Plug Upgrade for T-Handle Lock
(2) Non-Resettable Bills In / Bills Out Counter Kit
(2) Resettable Bills In / Bills Out Counter Kit
Portable Audit Printer Kit
"Sold Out" Filler Plate for Bill Dispensers
Custom Lexan Graphics Decal